Additive performance

Brake Fluid DOT4

SKU: 68209

ARDINA Brake Fluid DOT4 is a high performance brake and clutch fluid with a minimum dry boiling point of 250 °C. Greatly exceeds SAE J1703 / J1704, FMVSS Nr.116 DOT3 / DOT4 and ISO 4925 specifications. Its high boiling point increases durability and safety. Provides excellent corrosion protection and rubber seal compatibility.

Usage

Suitable for all hydraulic brake and clutch systems requiring synthetic fluid of DOT 4 specifications.

Direction

Follow vehicle manufacturer’s instructions when adding or replacing brake fluid. Miscible with all other brake fluids of DOT 4 specification. Must not be mixed with silicone type or silicone ester type of brake fluids. Store brake fluid clean and dry. Avoid contamination with fluids of any other kind and do not refill the container. Store brake fluid in the original container only. Keep the container tightly closed to prevent the absorption of moisture. Do not spill on car lacquer.

Dosage

Follow the service interval recommended by the car manufacturer. If no recommendation is given, it is advised to replace brake fluid at least every two years, preferably every year.

Product sheet

Brake Fluid DOT4

Technical specifications

Content

1L, 4L, 5L, 60L, 200L

Appearance

Clear Liquid

Colour

Light Amber

Density g/ml @ 20°C

1,06

Water content %

max 0,20

Equilibrium Reflux Boiling Point (ERBP)

260°C

Wet Equilibrium Reflux Boiling Point (WERBP)

160°C

Kinematic viscosity @ - 40°C

1400

Kinematic viscosity @ 100°C

2,2

Related products

Share this product

Request information or a quotation